Multi Bag Filter Housing

About Multi Bag Filter Housing

Multi Bag Filter Housing

We have established ourselves in presenting a wide array of Multi Bag Filter Housing. It is engineered with a rigid construction and modern techniques. We design suitable up to 30 Nos. filter Bag elements in single housing. We provide high quality Products with wide range of flow capacities up to 1500 M³/Hr.& contaminants holding capacities. It is normally used, wherever fine filtration required in almost all type of process industries.

Operation: -

This Product is preferably used to separate hard contaminants from liquid, gas and powder. Contaminated fluid or gas or powder is entered through inlet connection and scattered equally around the filter Bag and passed through filter Bag from inside to outside. Solid elements are collected from inside of Bag. And filtered Fluid or gas or powder exit from outlet connection. It is easy to remove and clean in a reliable manner without making any extra efforts. 

Features:

·         Easy dismantle for cleaning and maintenance.

·         Eye Bolt type cover locking structure

·         Less pressure drop design because of considering of higher filtration area.

·         Suitable for high temperature and pressure.

·         High dirt holding capacity.

·         Not burst at high difference pressure

·         Hingeor Davit arm assembly available for quick opening of cover flange.

·         Housings are made with Mirror, electro polishing to resist dirt and scale.

·         One coat of epoxy paint applied on outside surface for CS / MS Constructed.

·         Pressure gauge arrangement at top to monitor internal pressure of housing.

·         Safety valve at inlet/out connection to reduce internal pressure if increase.

·         Arrangement of difference pressure monitoring instruments.

Technical Data:

Design capability: -

·         Customized Design available.

·         Suitable up to 30 Nos of Bag filter elements with suitable length of up to 32 inches in single housing.

·         Bag filter element can be assembled with different type of collar such like PP collar bag, Snap bond collar bag, Steel ring collar bag,   Rubber collar bag etc.

·         Flow rate up to 1500 M³/Hr.

·         Mechanical Strength (ASME) Design Calculation on customer Request.

·         End connection up to ½ inch NPS to 24 inches NPS in Pipe schedule.

Bag Filter Element: -

·         4 inches x 10 inches Long Filter Bag

·         4 inches x 17 inches Long Filter Bag

·         7 inches x 17 inches Long Filter Bag

·         7 inches x 32 inches Long Filter Bag

·         Filtration Rating from 1 to 200 Micron

·         Type of fitment collars: PP collar bag, Snap bond collar bag, Steel ring collar bag, Rubber collar bag

·         Filter Media- Polypropylene (PP)

Material of Construction(Housing Body): -

·         SS 304

·         SS 304L

·         SS 316

·         SS 316L

·         Duplex Steel (SS 2205)

·         Carbon Steel (SA 516 Gr 70)

·         Mild Steel (IS 2062)

·         CS/MS + Rubber lining

·         CS/MS + FRP Lining

Gasket Material: -

·         Neoprene

·         Natural Rubber

·         Silicon

·         Buna-N

·         PTFE

·         EPDM

·         CAF

·         Spiral Wound Gasket

End Pipe Connections: -

·         ANSI B16.5 Flanged.

·         BS-10, Table D, E, F Flanged.

·         Butt-Welded Pipe schedule.

·         Tri Clover Adaptor

·         Threaded

·         Socket-welded

Applications:

·         Water Treatment

·         Chemical

·         Oil & Gas

·         Pharma

·         Paint & Ink

·         Food Beverages

·         Dairy

·         RO Plant

·         Petrochemical

·         Process industries & any more