Cross Design Type Basket Strainers

Cross Design Type Basket Strainers

We are manufacturer and supplier of a wide range of Cross Design Type Basket Strainers. It is engineered with a rigid construction and modern techniques. This product is designed for in-line type inlet/outlet connections.We Design high quality Products with wide range of flow capacities up to 2000 M³/Hr.

Strainers are proposed for applications, wherever large amounts of solid contaminant particles are expected. Strainers are permitted to filter wide range of fluids and retain any size of solid contaminant particles. Basket element is manufactured from different type of wage wire or wire mesh with supported by perforated sheet to get proper strength to basket element for increasing contaminates holding capacities.

Operation: -

This Product is ideally used to separate Solid contaminants Particles from liquid or gas. Contaminated fluid or gas is entered and distributed equally around the Basket Element and passed through Basket Element from outside to inside or inside to outside depended on customer requirements.And filtered liquid or gas exit from outlet connection. Solid elements are collected and removed easily from strainers. It is easy to maintain and clean in a reliable manner without making any extra efforts. 

Features:

·         Easy dismantle for cleaning and maintenance.

·         Eye Bolt type cover locking structure

·         Less pressure drop design because of considering of higher filtration area.

·         Suitable for high temperature and pressure.

·         Suitable for large amount of solid contaminant particles

·         High dirt holding capacity.

·         Hinge or Davit pipe assembly available for quick opening of cover flange.

·         Strainers are made with Mirror, electro polishing to resist dirt and scale.

·         One coat of epoxy paint applied on outside surface for CS / MS Constructed.

·         Pressure gauge arrangement at top to monitor internal pressure of Strainers.

·         Safety valve at inlet/out connection to reduce internal pressure if increase.

·         Arrangement of difference pressure monitoring instruments.

Technical Data:

Design capability: -

·         Customized Design available.

·         Designed Free flow area of basket 4-6 times higher then pipe cross section area.

·         Flow rate up to 1500 M³/hr.

·         Mechanical Strength (ASME) Design Calculation on customer Request.

·         Designed suitable Flow direction in to out or out to in as per customer requirements.

·         Multi basket elements in single strainer design available for easy cleaning and maintenance for high flow rate strainers.

·         End connection up to ½ inch NPS to 24 inches NPS in Pipe schedule.

Basket Element: -

·         Filter Media-Wire Mesh+Perforated sheet, Perforated Sheet, Wage-Wire

·         Filtration rating up to 500 Mesh (up to 20 Micron)

·         Material of construction SS 304, SS 304L, SS316, SS316L

·         Diameter of basket strainer min. 100 mm to max. customized.

Material of Construction(Strainer body): -

·         SS 304

·         SS 304L

·         SS 316

·         SS 316L

·         Duplex Steel (SS 2205)

·         Carbon Steel (SA 516 Gr 70)

·         Mild Steel (IS 2062)

·         CS/MS + Rubber lining.

·         CS/MS + FRP Lining.

Gasket Material: -

·         Neoprene

·         Natural Rubber

·         Silicon

·         Buna-N

·         PTFE

·         EPDM

·         CAF

·         Spiral Wound Gasket

End Pipe Connections: -

·         ANSI B16.5 Flanged.

·         BS-10, Table D, E, F Flanged.

·         Butt-Welded Pipe schedule.

·         Tri Clover Adaptor

·         Threaded

·         Socket-welded

Applications:

·         Water Treatment

·         Chemical

·         Oil & Gas

·         Power-plant

·         Textile

·         Cement Plant

·         Fertilizers

·         Refineries

·         Petrochemical

·         Process industries & any more

FAQ's of Cross Design Type Basket Strainers: